What is the wiring method of the automatic anti-collision lifting road pile
Release time:
2022-09-06
Automatic anti-collision lifting road pile as some of the main places of maintenance equipment, more and more loved by everyone, automatic anti-collision lifting road pile wiring method is what.
Automatic anti-collision lifting road pile as some of the main places of maintenance equipment, more and more loved by everyone, automatic anti-collision lifting road pile wiring method is what.
Lifting column installation wiring process
1. Reserved line for power unit of road pile equipment: the motor of road pile power unit is a three-core cable with red, black and yellow wires in turn. The solenoid valve is two black wires, and there is a two-core spiral lamp wire with warning lights, totaling seven wires and a total of five wires without warning lights. The wiring starts after the welding of the fixed steel bar of the outer cylinder is completed.
2. Wiring process: Open the stainless steel flange panel on the upper part of the hydraulic integrated machine of the power unit and place it on the ground on one side of the foundation ditch of the outer cylinder, and connect the seven-core cable led out from the upper part of the outer cylinder to the motor line, solenoid valve line and warning light line of the power unit respectively. Accurately remember the wire number or color of the seven-core cable, and the wire number color corresponding to the motor, solenoid valve and warning light on the equipment, so as to avoid the wrong connection of the control box.
3. Equipment wiring description: There are 3 lines of motor lines on the road pile, and the red motor, yellow motor and black motor are common, and the terminals corresponding to the control box cannot be connected in reverse. Solenoid valve 2 separate black wire, connected to the control box solenoid valve, solenoid valve common corresponding terminal, regardless of positive and negative. A two-core line of the warning light line is connected to the common terminal of the warning light and the warning light of the control box, and is divided into positive and negative poles.
4. Wiring standard: After the wire ends are connected, they are required to be welded with solder. First, they are wrapped with plastic tape, then two layers are wrapped with high-voltage waterproof tape, then they are wrapped with plastic tape, and then wrapped with electrical asphalt tape for a total of four times. After the wire ends are connected, the wires at the terminal are arranged and standardized and fixed under the power unit to prevent external forces from breaking the wiring. After finishing, connect the two wires connected to the warning light on the power unit, and measure the other end of the cable with a multimeter. The three wire motors are connected and the two wire solenoid valves are connected. The two lamp wires are connected, and the motor, solenoid valve and electric wire cannot be connected. After confirmation, the remaining cables are put into the wire storage box on the side of the outer cylinder in a standard manner, and each pile is connected to the corresponding terminal block in the control box.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include:Fully automatic lifting columnSemi-automatic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Automatic lifting road pile wiring method
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29