Automatic Lifting Column Installation Process and Steps
Release time:
2022-02-15
With the strengthening of the domestic anti-terrorism situation, the utilization rate of the automatic lifting column has gradually increased, and even more and more users have accepted it. Do you know the process and steps of the installation of the automatic lifting column.
With the strengthening of the domestic anti-terrorism situation, the utilization rate of automatic lifting columns has gradually increased, and even been accepted by more and more users, you knowAutomatic lifting columnIs the installation process and steps? The following small editor will give you an answer.
Step 1: Digging the foundation pit
Foundation pit width: 800mm, foundation pit depth: 1500mm
Step 2: laying the bottom datum plane
Bricks are laid at the bottom of the foundation pit. Masonry layer thickness 200mm
Step three: laying drainage (I)
Drainage channels are made of bricks on pre-laid gravel. Drainage channel width: 100mm, height: 100mm
Step three: laying drainage (II)
According to the number of lifting columns, build a layer above the drainage channel and cover the drainage channel to avoid filling the drainage channel when pouring cement.
Step 4: Place the lifting column
After the drainage channel is completed, put the lifting column in sequence according to the plan, and adjust the horizontal angle to ensure that the lifting column is flush with the road surface.
Step 5: Fixed Equipment
After ensuring that the equipment is level with the ground, fill in a small amount of cement to fix the equipment.
Step 6: Equipment wiring
The TV line uses RVV3 * 2.5 gauge wire, and the LED warning light uses 4*1.5 gauge wire. After connecting the line, plug the PVC pipe into the control box.
Step seven: control box wiring
According to the diagram for the control box connection method, the motor line is respectively connected to the positive and negative lines of the motor, the common line LED lamp group is connected to the positive and negative lines of the lamp group.
Step 8: Debugging
After the control box is connected, conduct a power-on test to ensure that the lifting is normal, and the rising and falling directions are consistent with the remote control.
Step 9: backfill rammed earth
After the equipment debugging is correct, fill in the sand and tamp it, leaving a distance of 200mm with the ground.
Step 10: Pave the ground
Ensure that the lifting column is parallel to the ground before pouring cement on the rammed soil layer, flush with the ground, and restore the road surface.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include: automatic lifting column, semi-automatic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 13930748833.
Key words:
Automatic Lifting Column Installation
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29