What if the flap barrier machine suddenly drops in an emergency?
Release time:
2023-05-13
Hydraulic flap barricade machine as some of the main places of maintenance equipment, more and more loved by everyone. What if the flap barrier machine suddenly drops in an emergency? The following is a small series for everyone to answer.
Hydraulic flap barricade machine as some of the main places of maintenance equipment, more and more loved by everyone. What if the flap barrier machine suddenly drops in an emergency? The following is a small series for everyone to answer.
The sudden emergency drop of the flap barrier machine needs to verify whether the electrical wiring is correct. Please rotate the two motors in the same way. If the power supply is normal, connect the lifting control switch to the barrier machine, and use the pilot operation control switch operated by people and transported by air to make the barrier machine run up and down the guide rail frame several times.
The operation of the hanging basket is stable, there is no beating or abnormal sound and other faults, and the guide roller should also be checked for gear contact. The operation method is the same as above, and then check the heating of the motor and reducer. After all the conditions are normal, the normal setting operation is allowed. For the newly installed construction cargo conveyor, a 10-minute 25% static test is required.
Check the rigidity of each main beam of the hanging basket and whether the positioning of the guide wheel is firm, and solve the problem immediately after finding it. After completing the setup preparation of each part of the engineering barrier machine, adjust the relative position of each part and the length of the switch arm of the stroke respectively at the same time as the trial operation, and then divide it into the following gaps to adjust the operation experiment of the hanging basket.
First cut off the power supply of the host, then remove the inspection cover connected between the vertical motor and the reducer, and insert the sliding rod into the shaft coupling hole of the unit. In the process of slipping, the brakes are braked at the same time, the brake at the tail of the motor should be opened manually, the second slip should be opened, and the cage 1m should be prepared.
At the same time, the lifting of the cage should be checked at the same time, and the position of each roller should be adjusted at any time to ensure that the gear and rack meshing position is accurate, and the gear and rack should be balanced. The contact between each roller and the guide rail frame should be uniform without collision. Then, the gate handle should be slowly pulled down. The above operations should be put down slowly. The above operations shall be repeated .. Mechanical drive commissioning is possible.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include: automatic lifting column, semi-automatic lifting column, hydraulic lifting column, landscape fixed column,Hydraulic flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Hydraulic flap barricade
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29