How deep does the foundation of automatic lifting column installation need to be dug
Release time:
2023-05-23
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone. Automatic lifting column installation foundation need to dig how deep? The following Xiaobian to answer.
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone. Automatic lifting column installation foundation need to dig how deep? The following Xiaobian to answer.
Fully automatic lifting column is to dig up the road as the foundation, fix the embedded part, and connect and debug. Sufficient embedded depth and solid foundation are important factors to ensure the safety of lifting column.
In order to ensure the normal construction of the foundation, the user must first determine whether there are pipelines, cables and other facilities affecting the construction within the depth of 1.5 meters below the construction location.
The understanding of the lifting column by the road people is often only to see a height exposed on the ground, but it is not. There is still a foundation underground. Everyone in the industry knows that the hydraulic lifting column needs to be slotted for drainage and its depth must be 1.3-1.5 meters.
(It is suggested that small partners who use hydraulic road piles must do drainage) But now many old cities have complicated pipelines, or many projects have basements and underground garages, and the depth of underground excavation is limited, making it difficult to dig too deep drainage grooves!
A hydraulic lifting column with a shallow pre-buried depth belongs to the field of lifting columns. The utility model discloses a hydraulic lifting column with a shallow pre-buried depth, including a pre-buried barrel, a lifting inner column, the pre-buried barrel is completely buried under the ground, the lifting inner column is located in the pre-buried barrel, and also includes a double-section hydraulic motor, one end of the double-section hydraulic motor is fixed at the bottom of the pre-buried barrel, and the lifting inner column;
The other end of the double-section hydraulic motor is provided with a first-stage telescopic rod and a second-stage telescopic rod, the second-stage telescopic rod is located inside the first-stage telescopic rod, and the power output end of the second-stage telescopic rod is fixedly connected with the lifting inner column.
Since the telescopic rod of the double-section hydraulic motor is set to two stages, the height of the hydraulic oil cylinder can be greatly shortened, thus the height of the embedded barrel can be greatly reduced when the motor is built in, the water seepage amount is reduced, the construction difficulty is reduced, and the motor installation and maintenance are convenient. At the same time, the setting of the integrated lifting inner column makes it more stress points when being hit, making the lifting inner column crashworthiness better.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a lifting column manufacturer integrating R & D, design, production, sales and service. Main products include: fullAutomatic lifting column,Semi-automatic lifting column, hydraulic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Fully automatic lifting column
Previous Page
Previous Page:
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29