What are the methods to prevent the derailment of the fully automatic lifting column
Release time:
2023-09-13
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone. What are the methods to prevent the derailment of the automatic lifting column? The following lifting column manufacturer Qi Xinlong will give you a good answer.
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone. What are the methods to prevent the derailment of the automatic lifting column? The following lifting column manufacturer Qi Xinlong will give you a good answer.
Install and level the bottom frame of the 1. full-automatic lifting column, put the self-lifting platform in place, make the center line coincide with the center line of the column, install the pull rod on the self-lifting platform, wear the wire rope, install the first group of columns, put the standard joint into the sleeve and connect with the foundation bolt, and control the net distance of the adjusted column track surface within 1985mm, and the vertical deviation shall be ≤ 1.5 ‰.
2. place the lifting pulley on the top of the two posts installed and wear the hoist wire rope. Use the jack-up platform, retract the expansion card to the clamping position, ensure that the bottom of the expansion card is flush with the first grid on the top of the column, reset the expansion card plate, loosen the lifting wire rope, remove the lifting pulley and place it on the platform, use the handle to install the second group of standard joints, ensure that the first group and the second group are on the same vertical line before tightening the bolts, and the deviation of the joint shall not be greater than 0.5mm, secure the pressure beam.
3. the full-automatic lifting column to install the strengthening diagonal brace, and tighten the connecting bolts, check the verticality of the standard section without deviation, adjust to meet the requirements, and check the reliability of the weight connection.
The 4. is then put into the hanging basket, wound around the steel wire rope, installed the linkage safety device, and the full-automatic lifting column is installed. Continue to raise the gantry to the specified height for the first time, and install the parking bracket at the corresponding height to run the trial operation. When the erection height of the door frame rises to 6m, the first attachment shall be set and increased every 3m.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a lifting column manufacturer integrating R & D, design, production, sales and service. Main products include:Fully automatic lifting columnSemi-automatic lifting column, hydraulic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Fully automatic lifting column
Previous Page
Previous Page:
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29