How to repair the full-automatic lifting column movement if it is broken
Release time:
2023-11-13
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone, automatic lifting column movement is broken how to repair.
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone, automatic lifting column movement is broken how to repair.
Lifting column movements are usually composed of ferrules, rolling elements and cages. Starting friction is small, and the difference between slip and control is also small.
Standardization and standardization have been promoted on the ground, with good interchangeability, and can be used interchangeably between different brands.
It simplifies the structure around the imported movement and facilitates maintenance and inspection. Usually can withstand radial and axial loads. It is easier to use in high and low temperature conditions.
Lifting columns used in industry contain an internal movement. We usually use lifting columns often. However, after a long period of use, the lifting column will have some failures.
In fact, there are many reasons for failure. The reason is that the movement in the lifting column is worn, so the cleaning and maintenance of the lifting column movement is essential. The specific recommendations are summarized as follows:
1. the lifting column is installed incorrectly at an early stage
1. The installation is not in place, the installation is offset or not installed in the movement position, resulting in the movement gap being too small. Inner and outer rings are not the same
2. Use strong when installing. Hitting the movement directly with a hammer will cause damage to the movement; it is the main cause of deformation. The center of rotation caused a divergence.
2. in the later use of lifting column lubrication
1. improper choice of lubricant or lubricant;
2. The lubricant or lubricating oil is not filled in place;
3. Incorrect lubrication method, etc.
4. Failure to add lubricating oil or lubricating oil in time;
Environmental pollution of 3. lifting column
1. The working environment of the movement is not clean and the working medium is polluted.
2. The working environment is not clean during the installation process, causing pollution;
3. Open the movement packaging too early before use, causing pollution;
Fatigue operation of 4. lifting column
The movement is overloaded for a long time; it is not repaired in time; improper maintenance; equipment aging, etc., are all causes of movement damage.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include:Fully automatic lifting column, stainless steel lifting column, semi-automatic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Fully automatic lifting column movement
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29