Automatic lifting column how to ensure that the motor runs into the best state
Release time:
2023-11-29
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone, automatic lifting column how to ensure that the motor runs into the best condition.
Automatic lifting column as some of the main places of maintenance equipment, more and more loved by everyone, automatic lifting column how to ensure that the motor runs into the best condition.
The adjustment of the phase angle of the upper and lower weight of the full-automatic lifting column motor changes the phase angle of the upper and lower weight, which can change the motion trajectory and residence time of the material on the net. In order to adapt the motor to the separation state required by various materials, such as the distribution of materials, processing capacity, separation efficiency, network rate and other changes, it should be adjusted to the best state.
Note: the running direction of the two motors is opposite to each other! Both motors can run inwards or outwards at the same time.
When the phase angle of the upper and lower weights decreases or increases, its function is to increase or decrease the exciting force of the motor. It increases or decreases the exciting force according to the number of layers of the user's motor and the specific gravity of the material, and adjusts the phase angle of the motor weight. How much can achieve the best screening effect. The upper and lower phase angles of the motor must be the same. The inclination of the motor is 4 °-10 °.
Sometimes due to the influence of parameters such as the proportion of materials, humidity, stacking inclination angle, etc., it is impossible to adjust the above-mentioned adjustment phase at one time. Therefore, users should have sufficient patience to adjust so that the motor can play its due high efficiency.
Daily inspection and maintenance carefully check whether the fastening bolts of each joint of the motor are loose. If it is loose, it will cause damage to the motor.
Whether the wiring from the vibration motor to the switch is worn or not, use neoprene vibration-resistant cable when replacing the cable. Shortage operation is strictly prohibited. Check the motor for abnormal sound and abnormal heating. The temperature limit of the motor bearing part is 40°C higher than the ambient temperature. If it is abnormal, add lubricating oil (Shell, Aiwanli, RL3 grease) or replace the bearing. The decoration of the motor shall be carried out by a technician with Junior College knowledge.
Whether the screen is tensioned and the mesh surface is damaged. If there is any damage, replace the mesh in time. The automatic lifting column motor must be cleaned up after each use.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include:Fully automatic lifting column, stainless steel lifting column, semi-automatic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Fully automatic lifting column motor
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29