Supreme S2000
Model: S2000-LH03
Key words:
Fully automatic lifting column
Classification:
Product Description
Extreme S2000
Column body cover plate
The cover plate of the column body ensures the compressive resistance of the road pile after it is lowered; the top cover of the column body is turned and the surface is decorated with anti-slip texture.
12V low voltage waterproof LED warning light beads (hidden)
Using DC12V warning light, high brightness, good light transmission; to ensure that the lamp beads can work normally after wading and impact
Imported 3M honeycomb reflective
The reflective film adopts micro prism technology, and the reflective brightness is more than 4 times of the engineering grade and more than 2 times of the traditional high strength grade. The unique reflective principle makes it have a large reflective wide angle at the same time.
Stainless steel column body
The column body stainless steel is processed and formed by a series of processes such as polishing, deburring, rough polishing and fine turning.
Stainless steel panel
The ground panel guarantees the compressive resistance of the road pile after it is lowered; the surface has a non-slip texture decorative design.
Embedded cylinder
The whole is made of stainless steel, and the outer surface of the cylinder is polished.
Power Unit
Hydraulic drive, can be immersed in water to work properly, liquid and solid particles of high protection capabilities. High precision sealing, stop dust inhalation.
Seepage(Can be used for drainage)
The bottom of the embedded barrel is provided with a water seepage port to prevent long-term water accumulation, improve work performance and extend service life.
|
Technical parameters |
Functional Parameters |
||
|
Column lifting height |
600mm |
Anti-collision force |
Normal use after impact with a load of 12 tons |
|
Cylinder diameter |
273mm |
Anti-destructive force |
Deformation of impact road pile with load of 16 tons |
|
Cylinder Material |
High quality non-lure steel |
Assembly structure |
Integrated mounting |
|
Cylinder surface process |
Polished Excircle |
Drainage mode |
Seepage or drainage system |
|
Cylinder wall thickness |
6 ~ 25mm (customizable) |
Limit mode |
Fixed point in place, NVH (noise, vibration and harshness) |
|
Panel Material |
High quality stainless steel |
Reflective strip |
Imported 3M |
|
Panel size |
450*450mm |
Warning light |
LED lamp beads |
|
Simplified Material |
High quality stainless steel |
Support protection rod |
Diameter M16 |
|
Cylinder size |
Diameter 375mm, height 900mm |
buffer heat |
4 |
|
Operation structure |
four-column concentric guide |
Guide protective cover |
4 |
|
Diameter of guide post |
16mm |
Double-layer anti-collision beam |
12mm |
Extreme special machine
Model: LH03
Advantages of oil-immersed movement
750mm total height
± 0.05 seconds synchronization standard
IP68 protection class
-40 ° c normal operation
Inlet sealing element
Imported oil pump
The whole aluminum alloy shell has super corrosion resistance and fast heat dissipation
7-liter large fuel tank factory filled with aviation hydraulic oil
High-performance cartridge components
Anodizing of oil circuit block
Model: LH01
| Technical parameters | |
| Height: | 570mm |
| Power: | 300W |
| Rated current: | 1-10A |
| Connect the power supply: | 3x2.5 |
| Sealing: | Combined seal |
| Rise time: | 1.8s |
| Pump Displacement | 4.2ML/R |
| Power: | 220/380v |
| Descent time: | 2.5s |
| Thermal protection: | automatic induction |
| Driving mode: | wave pressure drive |
| Protection class: | IP68 |
| Emergency relief voltage: | 12V |
| Maximum force: | 300KG |
| System pressure: | 8MPA |
| Emergency: | PREPARATION POWER DEPRESSURE |
| Operating temperature: | -20C-75 ℃ |
| Frequency of use: | intermittent use |
Above datais only for reference,Toprevailin kind.
| Material Table | ||
| 1 | electrical chaos | |
| 2 | Oil circuit block UT384 | |
| 3 | gear pump | |
| 4 | Oil tank T0202 | 1 |
| 5 | oil circuit block UT383 | 1 |
| 6 | Cylinder | 1 |
| 7 | overflow valve | 2 |
| 8 | Hydraulic | 1 |
| 9 | One-way valve | 1 |
| 10 | Solenoid valve | 1 |
| 11 | Coil | 1 |
| 12 | Hose assembly | 1 |
| 13 | O-ring | 1 |
| 14 | O-ring | 2 |
| 15 | O-ring | 1 |
| 16 | O-ring | 1 |
| 17 | Hexagon socket plug 4MN-10WD | 3 |
| 18 | Hexagon socket head 5MN-08WD | 8 |
| 19 | Hexagon socket head 4MN-14WD | 2 |
| 20 | Oil pipeline T0204 | 2 |
| 21 | Connecting shaft T0282 | 1 |
| 22 | Galvanized joint | 1 |
| 23 | Installation UT684 | 2 |
| 24 | Hose strainer hoop assembly | 1 |
| 25 | Gasket [Galvanized] | 1 |
| 26 | Poly nitrogen port shock pad | 1 |
| 27 | Gasket [galvanized] | 1 |
| 28 | Nut M16 | 2 |
| 29 | Transfer to UT68 | 1 |
| 30 | 1 Cylinder head UT679 | 1 |
| 31 | Outer cylinder T0260 | 1 |
| 32 | Screw TH8x665 | 1 |
| 33 | Screw H8-335 | 4 |
| 34 | Screw M8x130 | 4 |
| 35 | Screw H8x35 | 1 |
| 36 | Screw H8-25 | 4 |
| 37 | Waterproof joint | 1 |
| 38 | Screw M5x12 | 2 |
| 39 | Clamp | 1 |
online message