How to pick a tire with a tire pressure sensor
Release time:
2022-05-05
The safest and safest way to strip a tire with a tire pressure sensor is to remove the sensor and then strip the tire, but that is time-consuming and laborious. How to pick up the tire with the tire pressure sensor? The following editor will give you a good answer.
The safest and safest way to strip a tire with a tire pressure sensor is to remove the sensor and then strip the tire, but that is time-consuming and laborious. How to pick up the tire with the tire pressure sensor? The following editor will give you a good answer.
1. When pressing the tire, it is usually to find two points on the outside and two points on the inside, in order to separate the tire bead from the steel ring. When looking for a point, we must pay attention to avoid the tire pressure sensor, generally looking for two points that are 90 degrees from the valve.
2. After pressing, fix the tire on the turntable and prepare to remove the tire. First, remove the outer bead of the tire from the steel rim. When picking up the tire, be sure to locate the tire pressure sensor (valve) about 20cm in front of the crowbar (turn clockwise).
3. The pry-up position is at 12 o'clock, and the valve should be at about 2 o'clock. After the outside of the tire is removed, we lift the tire up and the steel rim does not move. Use a wrench to remove the tire pressure sensor and place it beside it, so that we can safely and boldly pick up the outer tire opening of the tire.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include: automatic lifting column, semi-automatic lifting column, landscape fixed column, flap barricade,Tire BreakWait. Tel: 13930748833.
Key words:
Bare tire
Previous Page
Next Page
Previous Page:
Next page:
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29