How to wire the anti-collision lifting column
Release time:
2022-12-12
Anti-collision lifting column as some of the main places of maintenance equipment, more and more loved by everyone, so how to anti-collision lifting column wiring.
Anti-collision lifting column as some of the main places of maintenance equipment, more and more loved by everyone, so how to anti-collision lifting column wiring.
1. Reserved line for power unit of road pile equipment: the motor of road pile power unit is a three-core cable with blue line in turn. Brown wire, flower wire and solenoid valve are two black wires, one two-core spiral lamp wire with warning light, a total of seven wires, and a total of five wires without warning light. Wiring starts after the welding of the embedded barrel fixed steel bar is completed.
2. Wiring process: Place the hydraulic integrated machine of the power unit on the ground on one side of the foundation ditch of the embedded barrel, and connect the seven-core cable led out from the top of the embedded barrel to the motor line, battery valve line and warning light line of the power unit respectively. Accurately remember the wire number or color of the seven-core cable, and the wire number color corresponding to the motor, battery valve and warning light on the equipment, so as not to connect the wrong wire to the control box.
3. Equipment wiring instructions: 3 lines of motor lines on the road pile are common to the blue motor, the brown motor and the scribing motor, and cannot be connected to the terminals corresponding to the control box. Two separate black wires of the battery valve are connected to the common corresponding terminals of the battery valve and the battery valve of the control box, regardless of positive or negative. One two-core line of the warning light line is connected to the common terminal of the warning light and the warning light of the control box, regardless of positive or negative.
4. Wiring standard: After the wire ends are connected, they are required to be welded with solder. First, they are wrapped with plastic tape, then two layers are wrapped with high-voltage waterproof tape, then they are wrapped with plastic tape, and then wrapped with electrical asphalt tape for a total of four times. After the wire ends are connected, the wires at the terminal are arranged and standardized and fixed under the power unit to prevent external forces from pulling off the wiring. After finishing, connect the two wires connected to the warning light on the power unit, and measure the other end of the cable with a multimeter. The three wire motors are connected and the two wire battery valves are connected. The two lamp wires are connected, and the motor, battery valve and electric wires are not connected. After confirmation, put the power unit into the embedded barrel. Alignment is made with the fixing bolt under the embedded barrel. Turn the button of the hydraulic power unit clockwise. Use wooden sticks and so on to connect the remaining cables to the lower part of the hydraulic power unit, so as to prevent the lifting column from touching the wires. Each pile is connected to the corresponding terminal row in the control box, refer to the wiring diagram of the control box.
Hebei Qi Xinlong Intelligent Technology Co., Ltd. is a research and development, design, production, sales and service in one of the anti-terrorism equipment manufacturers. Main products include:Fully automatic lifting columnSemi-automatic lifting column, landscape fixed column, flap barricade, tire breaker, etc. Tel: 15531750999.
Key words:
Anti-collision lifting column wiring
Previous Page
Previous Page:
recommend News
Advantages of electric lifting column
2024-03-01
Maintenance of electric lifting column
2024-02-29