Fine D10
Model: D10-LH02
Key words:
Fully automatic lifting column
Classification:
Product Description
Fine D10
Column body cover plate
The cover plate of the column body ensures the compressive resistance of the road pile after it is lowered; the top cover of the column body is turned and the surface is decorated with anti-slip texture.
12V low voltage waterproof LED warning light beads (hidden)
Using DC12V warning light, high brightness, good light transmission; to ensure that the lamp beads can work normally after wading and impact
Imported 3M honeycomb reflective
The reflective film adopts micro prism technology, and the reflective brightness is more than 4 times of the engineering grade and more than 2 times of the traditional high strength grade. The unique reflective principle makes it have a large reflective wide angle at the same time.
Stainless steel column body
The column body stainless steel is processed and formed by a series of processes such as polishing, deburring, rough polishing and fine turning.
Stainless steel panel
The ground panel guarantees the compressive resistance of the road pile after it is lowered; the surface has a non-slip texture decorative design.
Embedded cylinder
The whole is made of carbon steel, and the outer surface of the barrel is painted with high quality metal.
Power Unit
Hydraulic drive, can be immersed in water to work properly, liquid and solid particles of high protection capabilities. High precision sealing, stop dust inhalation.
Seepage(Can be used for drainage)
The bottom of the embedded barrel is provided with a water seepage port to prevent long-term water accumulation, improve work performance and extend service life.
|
Technical parameters |
Functional Parameters |
||
|
Column lifting height |
600mm |
Anti-collision force |
Normal use after impact with a load of 12 tons |
|
Cylinder diameter |
219mm |
Anti-destructive force |
Deformation of impact road pile with load of 16 tons |
|
Cylinder Material |
High quality non-lure steel |
Assembly structure |
Integrated mounting |
|
Cylinder surface process |
Polished Excircle |
Drainage mode |
Seepage into drainage system |
|
Cylinder wall thickness |
6 ~ 20mm (customizable) |
Limit mode |
Fixed point in place, NVH (noise, vibration and harshness) |
|
Panel Material |
High quality stainless steel |
Reflective strip |
Imported 3M |
|
Panel size |
Diameter 370mm |
Warning light |
LED lamp beads |
|
Simplified Material |
High quality stainless steel |
Support protection rod |
Diameter M16 |
|
Cylinder size |
Diameter 273mm, height 1110mm |
buffer heat |
3 |
|
Operation structure |
three-column concentric guide |
Guide protective cover |
3 |
|
Diameter of guide post |
12mm |
Double-layer anti-collision beam |
12mm |
Extra special movement Model: LH02
Advantages of oil-immersed movement
One-piece design, high rigidity structure
The integrated design of hydraulic pumps, hydraulic cylinders, motors, control valves and other components is integrated, which simplifies the installation and enhances the structure with the help of the shell cylinder, which greatly improves the operational reliability.
Ip68 protection class
Benefiting from the innovative structural design, this hydraulic drive can be immersed in water for a long time.
Emergency manual lifting
In case of emergencies such as power failure, the equipment can be raised or lowered through manual emergency devices.
Frequency of use 100%
Ultra-high frequency use, 24 hours of continuous uninterrupted operation
Wide temperature adaptability
Built-in heater, and with the heating capacity of the oil immersion motor, can ensure high-speed lifting, normal work at an ambient temperature of minus 40 ℃; and has a built-in motor overheating protection to avoid motor failure to the greatest extent.
IP68 protection class certified by SGS
Related Products
online message