Exquisite D20
Model number:D20-LH02
Exquisite D20
Column cover
The column cover ensures the pressure resistance of the road pile after it is lowered; the column cover is turned, and the surface has a non-slip texture decorative design.
12V low voltage waterproof LED warning lamp beads (concealed)
Use DC12V warning light, high brightness, good light transmission; to ensure that the lamp beads can work normally after wading or impact
Imported 3M honeycomb reflector
The reflective film uses microprism technology, and the reflective brightness is more than 4 times that of the engineering grade and more than 2 times that of the traditional high-strength grade. The unique reflective principle enables it to have a large reflective wide angle at the same time.
Stainless steel cylinder
The stainless steel of the column body is formed by a series of processes such as polishing, deburring, rough polishing, and fine turning.
Stainless steel panel
The ground panel guarantees the pressure resistance capacity of the road pile after it is lowered; the surface has a non-slip texture decorative design.
Embedded cylinder
The whole body is made of carbon steel, and the outer surface of the cylinder is high-quality metal baking paint.
Power unit
It is hydraulically driven, can work normally when immersed in water, and has high protection against liquid and solid particles. High-precision sealing performance prevents dust inhalation.
Water seepage (can be used as drainage)
The bottom of the pre-embedded cylinder is equipped with a water seepage port to prevent long-term water accumulation, improve work performance and extend service life.
Technical Parameters |
Function parameter |
||
Lifting height of column |
600mm |
Impact resistance |
Normal use after 12 tons of load |
Cylinder diameter |
219mm |
Destructive resistance |
Deformation of road piles with a load of 16 tons |
Cylinder material |
High-quality stainless steel |
Assembly structure |
All-in-one installation |
Cylinder surface process |
Fine polished outer circle |
Drainage method |
Seepage into a drainage system |
Cylinder wall thickness |
6~20mm (customizable) |
Limiting method |
Fixed point in place, NVH (noise, vibration and harshness) |
Panel material |
High quality stainless steel |
Reflective strip |
Import 3M |
Panel size |
diameter 420mm |
Warning Light |
LED lamp beads |
Simplified material |
High quality carbon steel |
Support protection rod |
Diameter M16 |
Cylinder size |
Diameter 325mm, height 1145mm |
Buffer heat |
3 |
Operating structure |
Three-pillar concentric orientation |
Guide protective sleeve |
3 |
Guide pillar diameter |
12mm |
Double anti-collision beam |
12mm |
Exquisite special movement Model: LH02
Advantages of oil-immersed movement
One-piece design, high rigid structure
The hydraulic pump, hydraulic cylinder, motor, control valve and other components are integrated and designed into one, simplifying installation and strengthening the structure with the help of the shell cylinder, which greatly improves the operational reliability.
IP68 protection level
Benefiting from the innovative structural design, this hydraulic drive can run in water for a long time without fear of any environment.
Emergency manual lifting
In the event of a power outage and other emergencies, the equipment can be raised or lowered through the manual emergency device
Use frequency 100%
Ultra-high frequency use, continuous operation for 24 hours
Wide temperature adaptability
The built-in heater and the heating capacity of the oil-immersed motor can ensure high-speed lifting under any climatic conditions and work normally at an ambient temperature of minus 40°C; and there is a built-in motor overheating protection to minimize motor failure.
IP68 protection level is certified by SGS
Copyright ©2021 Hebei Qixinlong Intelligent Technology Co., Ltd. 冀ICP备2021014359号 www.300.cn