Classic A3
Model: A3-LH01
Key words:
Fully automatic lifting column
Classification:
Product Description
Classic A3
Column body cover plate
The cover plate of the column body ensures the compressive resistance of the road pile after it is lowered; the top cover of the column body is turned and the surface is decorated with anti-slip texture.
12V low voltage waterproof LED warning light beads (hidden)
Using DC12V warning light, high brightness, good light transmission; to ensure that the lamp beads can work normally after wading and impact
Imported 3M honeycomb reflective
The reflective film adopts micro prism technology, and the reflective brightness is more than 4 times of the engineering grade and more than 2 times of the traditional high strength grade. The unique reflective principle makes it have a large reflective wide angle at the same time.
Stainless steel column body
The column body stainless steel is processed and formed by a series of processes such as polishing, deburring, rough polishing and fine turning.
Stainless steel panel
The ground panel guarantees the compressive resistance of the road pile after it is lowered; the surface has a non-slip texture decorative design.
Embedded cylinder
The whole is made of carbon steel, and the outer surface of the barrel is painted with high quality metal.
Power Unit
Hydraulic drive, can be immersed in water to work properly, liquid and solid particles of high protection capabilities. High precision sealing, stop dust inhalation.
Seepage(Can be used for drainage)
The bottom of the embedded barrel is provided with a water seepage port to prevent long-term water accumulation, improve work performance and extend service life.
|
Technical parameters |
Functional Parameters |
||
|
Column lifting height |
600mm |
Anti-collision force |
Normal use after impact with a load of 12 tons |
|
Cylinder diameter |
219mm |
Anti-destructive force |
Deformation of impact road pile with load of 16 tons |
|
Cylinder Material |
High quality non-lure steel |
Assembly structure |
Integrated mounting |
|
Cylinder surface process |
Polished Excircle |
Drainage mode |
Seepage into drainage system |
|
Cylinder wall thickness |
6 ~ 20mm (customizable) |
Limit mode |
Fixed point in place, NVH (noise, vibration and harshness) |
|
Panel Material |
High quality stainless steel |
Reflective strip |
Imported 3M |
|
Panel size |
Diameter 340mm |
Warning light |
LED lamp beads |
|
Simplified Material |
High quality stainless steel |
Support protection rod |
Diameter M16 |
|
Cylinder size |
Diameter 273mm, height 1110mm |
buffer heat |
3 |
|
Operation structure |
three-column concentric guide |
Guide protective cover |
3 |
|
Diameter of guide post |
12mm |
Double-layer anti-collision beam |
12mm |
Classic special movement
Classic high and low voltage movement characteristics
⊙New Process for Classic Products
⊙ ± 0.05 seconds
⊙ Mature stable type
Normal operation at -40°C
⊙ Imported sealing element
⊙ Inlet oil pump
⊙ The latest die-cast aluminum motor
⊙ The seamless steel pipe of the gas reservoir is galvanized and the double-side plate structure is stronger and more durable.
High-performance cartridge components
⊙ Anodized oil circuit block
Model: LH01
| Technical parameters | |
| Height: | 1038mm |
| Power: | 300W |
| Rated current: | 1-10A |
| Connect the power supply: | 3x2.5 |
| Sealing: | Combined seal |
| Rise time: | 3-5s |
| Movement structure: | Combined |
| Maximum force: | 100KG |
| Power: | 220/380v |
| Descent time: | 1-4s |
| Thermal protection: | automatic induction |
| Driving mode: | wave pressure drive |
| Protection class: | IP68 |
| Lifetime: | 1 million times |
| Operating noise: | Less than 20 decibels |
| Emergency: | PREPARATION POWER DEPRESSURE |
| Operating temperature: | -45 '℃-75 ℃ |
| Frequency of use: | termittency |
| Material Table | ||
| 1 | electrical chaos | |
| 2 | Oil circuit block UT384 | |
| 3 | gear pump | |
| 4 | Oil tank T0202 | 1 |
| 5 | oil circuit block UT383 | 1 |
| 6 | Cylinder | 1 |
| 7 | overflow valve | 2 |
| 8 | Hydraulic | 1 |
| 9 | One-way valve | 1 |
| 10 | Solenoid valve | 1 |
| 11 | Coil | 1 |
| 12 | Hose assembly | 1 |
| 13 | O-ring | 1 |
| 14 | O-ring | 2 |
| 15 | O-ring | 1 |
| 16 | O-ring | 1 |
| 17 | Hexagon socket plug 4MN-10WD | 3 |
| 18 | Hexagon socket head 5MN-08WD | 8 |
| 19 | Hexagon socket head 4MN-14WD | 2 |
| 20 | Oil pipeline T0204 | 2 |
| 21 | Connecting shaft T0282 | 1 |
| 22 | Galvanized joint | 1 |
| 23 | Installation T0205-B | 2 |
| 24 | Hose strainer hoop assembly | 1 |
| 25 | Gasket [Galvanized] | 1 |
| 26 | Poly nitrogen port shock pad | 1 |
| 27 | Gasket [galvanized] | 1 |
| 28 | Nut M16 | 2 |
| 29 | Screw plug PT% | 1 |
| 30 | Screw plug PT1/16 | 1 |
| 31 | Screw M8x25 | 4 |
| 32 | Screw H5x70 | 2 |
| 33 | Screw M5x170 | 4 |
| 34 | Screw M6x12 | 8 |
online message